1 / 6
Recessed Chamber Plate
Recessed Chamber Filter Plate
Polypropylene recessed chamber plates for general sludge, tailings and wastewater dewatering. Two matching plates close to form a sealed chamber that fills with slurry and holds the cake. Sizes 320–2000 mm, reinforced or virgin PP, made to match your press.
Specifications
- Plate sizes
- 320, 450, 630, 800, 870, 1000, 1250, 1500, 2000 mm square
- Chamber (cake) thickness
- 25–40 mm typical, other on request
- Design feed pressure
- 0.6–1.6 MPa typical
- Maximum operating temperature
- ~80 °C (polypropylene)
- Plate material
- reinforced or virgin polypropylene
- Feed position
- centre feed, corner feed on request
- Filtrate drainage
- open discharge or closed (piped) discharge
- Cloth fixing
- over-the-barb or caulked edge, to suit your press
- Handle type
- moulded lugs or bolt-on handles to match the press
Description
A recessed chamber plate is the workhorse of the filter press. Each plate has a recessed, pyramid-studded face; two plates close together to form a sealed chamber that fills with slurry under pump pressure. The solids build into a cake against the filter cloth while the filtrate drains away through the studded surface. It is the simplest and most economical plate for general dewatering, and the widest in size range.
When to use
- General sludge, tailings, POME and wastewater dewatering
- Standard cake dryness is acceptable
- Polypropylene gives enough corrosion resistance for the slurry
- A wide range of plate sizes is needed, from 320 to 2000 mm
- A cost-effective replacement set for an existing press
When not to use
- A much drier cake is needed — use a membrane (diaphragm) plate
- Filtrate must be contained drip-free — use a CGR gasketed plate
- The slurry runs hotter than ~80 °C or is chemically aggressive — use a special-material plate
- Very thin cakes or precoat and polishing duty — use plate and frame
Options
- Reinforced polypropylene for strength, or virgin PP for food and purity-critical duty
- Centre or corner feed, and open or closed (piped) filtrate discharge
- Feed and filtrate ports drilled to match your existing press
- Cloth fixing and handles to suit the press
- Custom plate sizes on request
Features
- Two plates form each sealed filtration chamber
- Reinforced polypropylene for strength, virgin PP for purity-critical duty
- Pyramid-studded drainage face supports the cloth and speeds filtrate flow
- Centre or corner feed, open or closed filtrate discharge
- Made to match the size, ports and cloth fixing of your existing press
- Interchangeable with common press makes — send a sample or drawing
Applications
- Palm oil mills — POME and effluent sludge dewatering
- Mining and minerals — tailings and concentrate dewatering
- Pulp and paper — effluent and lime mud
- Power plants — wastewater and ash or FGD slurry
- Municipal and industrial wastewater treatment
Materials
- Reinforced polypropylene (PP-R)
- Virgin polypropylene for food, pharmaceutical and fine-chemical duty
- Polypropylene handles and port bushings
Recessed Chamber Filter Plate: common questions
Where is Recessed Chamber Filter Plate used?
Palm oil mills — POME and effluent sludge dewatering; Mining and minerals — tailings and concentrate dewatering; Pulp and paper — effluent and lime mud; Power plants — wastewater and ash or FGD slurry; Municipal and industrial wastewater treatment.
What materials are available for Recessed Chamber Filter Plate?
Reinforced polypropylene (PP-R); Virgin polypropylene for food, pharmaceutical and fine-chemical duty; Polypropylene handles and port bushings.
What do you need to quote Recessed Chamber Filter Plate?
Plate size (mm) and number of plates, or your press make and model; Plate type: recessed chamber, membrane, gasketed (CGR), plate and frame, or special material; Plate thickness and feed port position (centre or corner); Slurry or material, with operating pressure and temperature; Quantity and delivery location; A photo of a worn plate or the press nameplate helps us match it (optional).
Who supplies Recessed Chamber Filter Plate in Indonesia?
PT Misuba Guna Indonesia supplies Recessed Chamber Filter Plate to industrial plants across Indonesia from its base in Tangerang, Banten. Send your operating conditions and quantity to sales@misubaguna.com or WhatsApp +62 811-8715-671 for a quotation.
-
-
-
-
Special Material Plate
Special Material Filter Plate
Need a price, sizing or a drawing for Recessed Chamber Filter Plate?
Send your operating conditions and quantity. Our sales team will check the details and quote.