Material Handling
Bucket elevators, chain, scraper, screw and belt conveyors for moving bulk solids through a plant, plus the buckets, chains, idlers, pulleys and screw flights that keep them running.
Bulk material has to be lifted, carried and fed from one process step to the next. Our material handling range covers the equipment that does it: bucket elevators for vertical lifts, belt conveyors for long horizontal runs, chain and scraper conveyors for hot, abrasive or dusty material in enclosed casings, and screw conveyors for short, metered feeds.
Each conveyor is designed to your material, capacity, distance and layout, supplied new or built to replace an existing unit on the same footprint. Spare buckets, chains, sprockets, idlers, pulleys, belts and screw flights are available for most makes.
-
Vertical Conveying
Bucket Elevator
Belt and chain bucket elevators for lifting grain, meal, cement, clinker, fertilizer and other bulk solids vertically, designed to your capacity and lift height.
- Typical capacity
- from a few t/h up to several hundred t/h
- Typical lift height
- up to around 60 m, higher by design
-
Conveyor
Chain Conveyor
Enclosed drag chain and en-masse chain conveyors for moving bulk solids horizontally or on an incline, with multiple inlets and outlets in one dust-tight casing.
- Typical capacity
- from a few t/h up to several hundred t/h
- Typical length
- up to around 100 m per conveyor
-
Conveyor
Scraper Conveyor
Scraper chain conveyors and submerged scraper conveyors for ash, clinker, slag and abrasive bulk solids, built heavy for continuous duty.
- Typical capacity
- from a few t/h up to around 100 t/h
- Chain speed
- typically 0.05–0.3 m/s, slower for submerged duty
-
Photo on request
Conveyor
Screw Conveyor
Trough, tubular and shaftless screw conveyors and screw feeders for conveying and metering powders, granules and sticky bulk material over short distances.
- Typical screw diameter
- 150–800 mm
- Typical length
- up to around 30 m per screw, longer with intermediate hangers
-
Conveyor
Belt Conveyor
Troughed, flat and inclined belt conveyors for carrying bulk material over long distances, with idlers, pulleys, belts and drives sized to your capacity and layout.
- Typical belt width
- 400–1,400 mm, wider by design
- Typical belt speed
- 1–4 m/s
-
Spare & Wear Parts
Conveyor Spare Parts
Replacement elevator buckets, conveyor chains, sprockets, idlers, pulleys, belts and screw flights for bucket elevators and belt, chain, scraper and screw conveyors.
- Supply basis
- drawing, part number, nameplate or worn sample
- Equipment covered
- bucket elevator, belt, chain, scraper and screw conveyors
Not sure which Material Handling product fits?
Send your flow, pressure, temperature and media. Our sales team will recommend a model and quote.