Material Property Library
Typical mechanical, thermal, and chemical resistance properties for the steels, alloys, elastomers, plastics, and ceramics used in expansion joints, linings, seals, and heat exchangers. Click a material for its full sheet, or tick up to three to compare.
55 materials
9 families
SI and Imperial units
| Carbon Steel ASTM A105ASTM A105 / ASME SA105 | Carbon & Alloy Steel | 7850 | 250 | 485 | 200 | 425 | -29 | |
| Carbon Steel ASTM A36 / SS400ASTM A36 / JIS G3101 SS400 | Carbon & Alloy Steel | 7850 | 250 | 400 | 200 | 400 | -20 | |
| Carbon Steel Pipe ASTM A106 Gr BASTM A106 Grade B / ASME SA106 | Carbon & Alloy Steel | 7850 | 240 | 415 | 200 | 425 | -29 | |
| Low Temp Carbon Steel A350 LF2ASTM A350 LF2 / ASME SA350 | Carbon & Alloy Steel | 7850 | 250 | 485 | 200 | 400 | -46 | |
| Pressure Vessel Plate A516 Gr 70ASTM A516 Grade 70 / ASME SA516 | Carbon & Alloy Steel | 7850 | 260 | 485 | 200 | 450 | -46 | |
| Chromoly Alloy Steel AISI 4140AISI 4140 / 42CrMo4 / UNS G41400 | Carbon & Alloy Steel | 7850 | 655 | 850 | 205 | 500 | -40 | |
| Alloy Steel Stud Bolt A193 B7ASTM A193 Grade B7 / AISI 4140 Q&T | Carbon & Alloy Steel | 7850 | 725 | 860 | 205 | 450 | -29 | |
| Stainless Steel 304UNS S30400 / ASTM A240 / 1.4301 | Stainless Steel | 8000 | 215 | 505 | 193 | 870 | -196 | |
| Stainless Steel 304LUNS S30403 / ASTM A240 / 1.4306 | Stainless Steel | 8000 | 170 | 485 | 193 | 800 | -196 | |
| Stainless Steel 316UNS S31600 / ASTM A240 / 1.4401 | Stainless Steel | 8000 | 290 | 580 | 193 | 870 | -196 | |
| Stainless Steel 316LUNS S31603 / ASTM A240 / 1.4404 | Stainless Steel | 8000 | 240 | 550 | 193 | 870 | -196 | |
| Stainless Steel 316TiUNS S31635 / DIN 1.4571 / ASTM A240 | Stainless Steel | 8000 | 240 | 540 | 193 | 870 | -196 | |
| Stainless Steel 321UNS S32100 / ASTM A240 / 1.4541 | Stainless Steel | 8030 | 240 | 570 | 193 | 900 | -196 | |
| Stainless Steel 310S (Heat Resistant)UNS S31008 / ASTM A240 / 1.4845 | Stainless Steel | 7980 | 245 | 590 | 200 | 1150 | -196 | |
| Stainless Steel 904LUNS N08904 / ASTM B625 / 1.4539 | Stainless Steel | 8050 | 230 | 530 | 190 | 400 | -196 | |
| 17-4 PH Stainless SteelUNS S17400 / ASTM A564 / 1.4542 | Stainless Steel | 7750 | 1170 | 1310 | 196 | 315 | -196 | |
| Duplex Stainless Steel 2205UNS S31803 / S32205 / 1.4462 | Duplex | 7800 | 450 | 655 | 200 | 300 | -50 | |
| Super Duplex 2507UNS S32750 / 1.4410 / EN 10088-3 | Duplex | 7800 | 550 | 750 | 200 | 250 | -50 | |
| Zeron 100 Super DuplexUNS S32760 / 1.4501 / EN 10088-3 | Duplex | 7840 | 550 | 750 | 200 | 250 | -50 | |
| Inconel 600UNS N06600 / W.Nr. 2.4816 | Nickel Alloys | 8470 | 240 | 655 | 207 | 1093 | -196 | |
| Inconel 625UNS N06625 / W.Nr. 2.4856 | Nickel Alloys | 8440 | 460 | 880 | 205 | 980 | -196 | |
| Inconel 718 (Hardened Superalloy)UNS N07718 / W.Nr. 2.4668 | Nickel Alloys | 8190 | 1100 | 1375 | 200 | 704 | -250 | |
| Incoloy 825UNS N08825 / W.Nr. 2.4858 | Nickel Alloys | 8140 | 240 | 580 | 196 | 540 | -196 | |
| Hastelloy C-276UNS N10276 / W.Nr. 2.4819 | Nickel Alloys | 8890 | 355 | 785 | 205 | 1040 | -196 | |
| Monel 400UNS N04400 / W.Nr. 2.4360 | Nickel Alloys | 8800 | 240 | 550 | 179 | 480 | -196 | |
| Alloy 20 (Carpenter 20)UNS N08020 / ASTM B463 / 2.4660 | Nickel Alloys | 8080 | 240 | 550 | 193 | 500 | -196 | |
| Aluminum 6061-T6UNS A96061 / ASTM B221 | Copper & Aluminium | 2700 | 276 | 310 | 68.9 | 150 | -200 | |
| Aluminum 7075-T6 (High Strength)UNS A97075 / ASTM B209 | Copper & Aluminium | 2810 | 503 | 572 | 71.7 | 120 | -200 | |
| Copper C11000 (ETP)UNS C11000 / ASTM B152 | Copper & Aluminium | 8890 | 69 | 220 | 115 | 200 | -200 | |
| Brass C36000 (Free-Cutting)UNS C36000 / ASTM B16 | Copper & Aluminium | 8500 | 310 | 390 | 97 | 200 | -196 | |
| Aluminum Bronze C95400UNS C95400 / ASTM B148 | Copper & Aluminium | 7450 | 240 | 585 | 110 | 260 | -196 | |
| Cupronickel 90/10 (C70600)UNS C70600 / ASTM B111 | Copper & Aluminium | 8940 | 105 | 310 | 135 | 300 | -196 | |
| Titanium Grade 2UNS R50400 / ASTM B265 | Titanium & Zirconium | 4510 | 275 | 345 | 105 | 400 | -196 | |
| Titanium Grade 5 (Ti-6Al-4V)UNS R56400 / ASTM B348 | Titanium & Zirconium | 4430 | 880 | 950 | 114 | 400 | -210 | |
| Zirconium 702UNS R60702 / ASTM B551 | Titanium & Zirconium | 6510 | 207 | 379 | 99 | 350 | -196 | |
| EPDM RubberASTM D2000 M4CA / ISO 1629 EPDM | Elastomers | 1150 | 12 | 15 | 0.005 | 150 | -40 | |
| NBR (Nitrile Rubber)ASTM D2000 BG / ISO 1629 NBR | Elastomers | 1200 | 14 | 18 | 0.008 | 120 | -30 | |
| HNBR (Hydrogenated Nitrile)ASTM D2000 DH / ISO 1629 HNBR | Elastomers | 1250 | 20 | 28 | 0.012 | 160 | -35 | |
| Viton® / FKM FluoroelastomerASTM D2000 HK / ISO 1629 FKM | Elastomers | 1850 | 15 | 17 | 0.01 | 230 | -20 | |
| FFKM (Kalrez® Perfluoroelastomer)ASTM D2000 FK / ISO 1629 FFKM | Elastomers | 2010 | 18 | 22 | 0.015 | 325 | -15 | |
| Neoprene / CR RubberASTM D2000 BC / ISO 1629 CR | Elastomers | 1350 | 11 | 16 | 0.006 | 110 | -35 | |
| Natural Rubber (NR / Pure Gum)ASTM D2000 AA / ISO 1629 NR | Elastomers | 1050 | 18 | 24 | 0.004 | 80 | -50 | |
| PTFE (Virgin Teflon®)ASTM D4894 / D1457 / ISO 12086 | Fluoropolymers & Plastics | 2180 | 23 | 30 | 0.5 | 260 | -200 | |
| PTFE 25% Glass FilledASTM D4745 | Fluoropolymers & Plastics | 2250 | 28 | 22 | 0.95 | 260 | -200 | |
| PFA FluoropolymerASTM D3307 / ISO 12086 | Fluoropolymers & Plastics | 2150 | 15 | 28 | 0.65 | 260 | -200 | |
| PVDF (Kynar® Fluoropolymer)ASTM D3222 / ISO 10931 | Fluoropolymers & Plastics | 1780 | 50 | 55 | 2.1 | 150 | -40 | |
| PEEK (Polyether Ether Ketone)ASTM D6262 | Fluoropolymers & Plastics | 1320 | 100 | 110 | 3.6 | 250 | -60 | |
| Nylon 66 (PA66)ASTM D5989 / ISO 1874 | Fluoropolymers & Plastics | 1140 | 85 | 90 | 2.8 | 100 | -40 | |
| UHMWPE (Polyethylene)ASTM D4020 / ISO 15527 | Fluoropolymers & Plastics | 930 | 23 | 40 | 0.7 | 80 | -150 | |
| Alumina Ceramic 99.5% Al2O3ASTM C784 / ISO 6474 | Ceramics, FRP & Gaskets | 3900 | n/a | 350 | 370 | 1600 | -200 | |
| Silicon Carbide (Sintered SiC)ASTM C1286 / ISO 20507 | Ceramics, FRP & Gaskets | 3150 | n/a | 450 | 410 | 1400 | -200 | |
| FRP / GRP (Vinyl Ester Resin)ASTM D3299 / BS 4994 | Ceramics, FRP & Gaskets | 1800 | 150 | 210 | 14.5 | 120 | -40 | |
| Flexible Expanded GraphiteASTM F104 / EN 13555 | Ceramics, FRP & Gaskets | 1000 | 5 | 9 | 1.2 | 550 | -200 | |
| CNAF (Non-Asbestos Sheet)ASTM F104 / BS 7531 Grade X | Ceramics, FRP & Gaskets | 1800 | 8 | 14 | 0.8 | 250 | -50 | |
| Mica Sheet (High Temp Gasket)ASTM F104 / IEC 60371 | Ceramics, FRP & Gaskets | 2100 | 12 | 25 | 2.5 | 1000 | -100 |
No material matches your search. Ask our engineers and we will check the grade for you.
About these values
- Values are typical room-temperature figures for the annealed or standard condition. Certified minimums are set by each standard and by the mill certificate, not by this table.
- Max and min temperature are general service limits. Pressure, media, and cycling usually lower the practical limit.
- Chemical ratings are a broad screen at about 20 °C. For a specific chemical and concentration, use the Chemical Resistance Guide.
- Yield strength is not given for brittle ceramics, which fail without yielding.
Need a material confirmed?
Send us the media, temperature, pressure, and size. Our engineers will recommend a material and quote the expansion joint, lining, hose, or gasket to suit.
Sizing a joint? Try the Expansion Joint Selector or Flange Standards.