Filter Press Plates
New and replacement filter press plates from 320 to 2000 mm, made to match your existing press — plate size, thickness, port positions, handles and cloth fixing. Recessed chamber, membrane, gasketed, plate-and-frame and special-material plates for sludge, tailings, POME and process filtration.
PT Misuba Guna Indonesia supplies new and replacement filter press plates for sludge dewatering, mineral processing and process filtration. Plates are made to match the press you already run, so a replacement set drops straight in: we work to the plate size, thickness, feed and filtrate port positions, handle type and cloth fixing of your existing press, or to the plate schedule of a new one.
Sizes run from 320 mm up to 2000 mm square, in reinforced or virgin polypropylene for general duty and in special materials — PVDF, cast iron, stainless steel or rubber-faced — for hot, abrasive or aggressive slurries. Choose a plate type below, or send us your press make and model with a photograph or sample of a worn plate and we will identify it and quote a matching set.
Choosing a plate type
Typical values — the final specification is confirmed per application.
| Plate type | Typical feed pressure | Cake dryness | Max temperature | Typical use |
|---|---|---|---|---|
| Recessed chamber (PP) | 0.6–1.6 MPa | Standard | ~80 °C | General sludge, tailings, POME, wastewater |
| Membrane / diaphragm | ~0.8–1.0 MPa feed, squeeze to ~1.6 MPa | Drier, shorter cycle | ~80 °C (PP) | Where cake moisture and disposal cost matter |
| CGR / gasketed | As chamber | Standard | ~80 °C | Leak-free, odour, toxic or drip-sensitive duty |
| Plate & frame | Low–medium | Adjustable cake thickness | ~80 °C (PP) | Edible oil, small batch, precoat and polishing |
| Special material | Per design | Per design | High-temp / chemical | Aggressive chemicals, hot slurry (PVDF, cast iron, SS, rubber) |
Squeeze pressures higher than shown are available on request.
Typical applications
- Palm oil mills — POME and effluent sludge dewatering
- Mining and minerals — tailings and concentrate dewatering
- Pulp and paper — effluent and lime mud
- Power plants — wastewater and ash or FGD slurry
- General wastewater — municipal and industrial treatment sludge
Filter cloths, membrane squeeze diaphragms and plate-shifting spares can be supplied to suit the plates we provide — ask our team.
-
Recessed Chamber Plate
Recessed Chamber Filter Plate
Polypropylene recessed chamber plates for general sludge, tailings and wastewater dewatering. Two matching plates close to form a sealed chamber that fills with slurry and holds the cake. Sizes 320–2000 mm, reinforced or virgin PP, made to match your press.
- Plate sizes
- 320, 450, 630, 800, 870, 1000, 1250, 1500, 2000 mm square
- Chamber (cake) thickness
- 25–40 mm typical, other on request
-
Membrane (Diaphragm) Plate
Membrane Filter Plate
Membrane (diaphragm) filter plates squeeze the cake after filling for a drier cake and a shorter cycle. A flexible PP, TPE or rubber membrane inflates with water or air against the cake. Sizes 320–2000 mm, made to match your press.
- Plate sizes
- 320–2000 mm square
- Membrane material
- polypropylene, TPE or rubber
-
CGR / Gasketed Plate
CGR Gasketed Filter Plate
Gasketed (CGR) recessed plates seal around the chamber and the ports for leak-free, drip-free filtration. They keep filtrate contained for odorous, toxic or drip-sensitive slurries. Sizes 320–2000 mm.
- Plate sizes
- 320–2000 mm square
- Sealing
- gasket around the chamber and the feed and filtrate ports
-
Plate and Frame
Plate and Frame Filter Plate
Plate-and-frame sets — solid plates alternating with open frames — give an adjustable cake thickness for precoat, polishing and small-batch filtration. Common in edible oil. Sizes 320–2000 mm.
- Plate sizes
- 320–2000 mm square
- Construction
- solid plates alternating with open frames
-
Special Material Plate
Special Material Filter Plate
Filter plates in PVDF, cast iron, stainless steel or rubber-faced construction for hot, abrasive or chemically aggressive slurries beyond the range of polypropylene. Material and design to suit the duty.
- Plate materials
- PVDF, cast iron, stainless steel or rubber-faced
- Plate sizes
- to suit the duty, on request
Not sure which Filter Press Plates product fits?
Send your flow, pressure, temperature and media. Our sales team will recommend a model and quote.